Boatbuilding methods boatbuilding with plywood plywood is one of the cheapest and easiest building materials, one that the average do-it-yourselfer is both familiar and comfortable with.. For the home boat builder (last up-dated 28/08/09) there are many methods of construction available to the home boat builder - on this page l will discuss the most popular methods used and compare them so that the new builder can make a good choice for his/her boat building project.. Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin. this type of construction can eliminate much of the need for frames or ribs..
The “stitch-and-glue” construction method is the easiest way to build a boat, as tens of thousands of amateur boatbuilders will testify. the approach, which emphasizes the use of epoxy adhesives and strategic fiberglass reinforcement combined with marine plywood, is ideal for first-timers.. The stitch and glue boatbuilding method is an easy way for a beginner to make a plywood boat. in a nutshell stitch and glue boatbuilding has 4 major steps. plywood parts of the boat are measured and cut according to plans. small holes are made around the edges of the pieces.. 4 wooden boat building techniques. there are four basic wooden boat building construction techniques used by home boat builders. these are the stitch and tape, the ply on frame, the strip planking, and the clinker ply..
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.